Start with the thread on your lens, not the adapter
The SportDiver 52 & 67mm Lens Adapter is a single accessory with two thread sizes: 52mm and 67mm. That means the first decision is not which adapter to buy, but which thread your lens uses. Check the front or barrel of the lens for a diameter marking before you order.
If your lens is marked 52mm, it uses the 52mm side of the adapter. If it is marked 67mm, it uses the 67mm side. Lenses with other thread sizes are not covered by this adapter's stated support, so confirm the thread before purchase.
What the adapter is designed to do
- SportDiver 52 & 67mm Lens Adapter: The SportDiver 52 & 67mm Lens Adapter lets you mount 52mm and 67mm threaded lenses to compatible underwater smartphone housing setups. This is the core function: it bridges your lens thread to the housing, so the lens thread size is the deciding factor.

SportDiver 52 & 67mm Lens Adapter - SportDiver 52 & 67mm Lens Adapter: It fits all SportDiver Housings. If you own a SportDiver housing, the adapter is intended to work with it, which simplifies the housing-side compatibility question.
- SportDiver 52 & 67mm Lens Adapter: The adapter is constructed with hard anodized machined aluminum and stainless-steel components. These materials are part of the product's build, but they do not change the thread-matching step.
A careful setup sequence for attaching a lens
The supplied product information does not include a detailed installation procedure, so treat these as practical checkpoints rather than manufacturer instructions. If your housing or lens manual provides specific steps, follow those.
- Confirm the lens thread size: Look for a 52mm or 67mm marking on the lens. If you cannot find one, do not guess; the adapter only states support for those two thread sizes.
- Check that your housing is a SportDiver: The adapter is listed as fitting all SportDiver Housings. For other housing models, compatibility is not confirmed by the supplied information.
- Attach the adapter to the housing before adding the lens: The adapter is the interface between housing and lens. The catalog does not specify a mounting order, so use the sequence your housing documentation recommends.
- Thread the lens on gently: Because the adapter supports both 52mm and 67mm threads, make sure the lens is seated on the correct side and starts smoothly. Cross-threading is a risk with any threaded accessory.
- Do a dry check before the dive: With the housing empty or sealed according to its own instructions, verify the lens sits securely and does not obstruct the housing's lens port. The supplied information does not describe port clearance, so inspect it yourself.
52mm vs 67mm: what the thread size changes for you
The adapter itself supports both sizes, but your lens choice still affects handling and the accessories you can add later. The supplied records do not list lens weights or optical performance, so the comparison below stays with what is confirmed.
- 52mm lenses: Use the 52mm thread on the adapter. This is the smaller of the two supported thread sizes, which may suit compact macro or wide lenses, though the catalog does not provide lens-specific compatibility beyond the thread.
- 67mm lenses: Use the 67mm thread on the adapter. The adapter is named for both sizes, so a 67mm lens is within its stated support, but confirm your specific lens before purchase.
- Lenses with other thread sizes: Not supported by the adapter's stated 52mm and 67mm threading. The supplied information does not mention step-up or step-down rings, so do not assume they will work.
Where the catalog leaves you to verify
The supplied product record explicitly asks you to confirm compatibility with your specific housing and lens before purchase. That is the honest limit of this guide: the adapter is listed for all SportDiver Housings and for 52mm and 67mm lenses, but the record does not list every lens model, port diameter, or wet-lens versus dry-lens distinction.
It also does not include installation steps, torque guidance, or care instructions. If your lens or housing documentation covers those points, use it. If not, a cautious dry-fit and a visual check are the reasonable next steps rather than assumptions.
Product facts for the SportDiver 52 & 67mm Lens Adapter
- SportDiver 52 & 67mm Lens Adapter: SKU: SL081. Useful if you are comparing listings or checking the exact accessory.
- SportDiver 52 & 67mm Lens Adapter: The adapter is an accessory in the SeaLife Cameras smartphone housing line and is available in a Standard option. It is a housing accessory rather than a standalone lens, so it is meant to pair with a SportDiver housing and a threaded lens.
- SportDiver 52 & 67mm Lens Adapter: The product name and description state support for both 52mm and 67mm lens threading. This is the basis for choosing the adapter by lens thread rather than by a separate 52mm or 67mm model.


